Wiring Material: 5v

Showing posts with label 5v. Show all posts

Sunday, October 12, 2014

Power Supply 5V 1 3 3A by LM2575

POWER1 is a switched power supply specially designed for use with modern single board computers. The mechanical dimensions match exactly those of the SBC ZWERG11A. Due to the small mechanical dimensions and the modern design, POWER1 can be used in all applications requiring a regulated voltage of 5 Volts DC, up to 3 Amperes. Voltage regulation is done with a component from National Semiconductor, known as “simple switcher”. Regarding the amount of extra components one can really call the design “simple”, yet resulting in a reliable and low-cost power supply.

Tuesday, September 2, 2014

3 3V And 5V Outputs Dc Dc Converter Wiring diagram Schematic

This is the 3.3V And 5V Outputs - Dc-Dc Converter Circuit Diagram. This Input, voltages can range from 8 V to 30 V. The load range on the 5 V is 0,05 A to 5 A while the 3.3-V load range is 0.1 A to 1 A. The schema is self-protected under no-load conditions. Over all load and line conditions, .including cross regulation, the 3.3-V output varies from 3.25 V to 3.27 V. The 5-V output varies from 4.81 V to 5.19 V under the same conditions.

In a typical application to 0.5 A on the 3.3 V and 0.25 A on the 5 V, efficiency is typically 76%, With an input voltage of 30 V and a full-load condition, the efficiency drops to 66%. In normal operating regions, efficiency is always better than 70%.The 5-V ripple is less than 75 mV and the 3.3-V ripple less than 50 mV over all line and load conditions.

3.3V And 5V Outputs - Dc-Dc Converter Circuit Diagram